中文
- 中文
- English
- français
- Deutsch
- русский
- italiano
- español
- português
- 日本語
- 한국의

1XN MEMS 光开关

Features

Proven MEMS durability and reliability
Compact Form Factor
Fast switching time
Qualified to Telcordia GR-1073-CORE and RoHS

Applications

Opticalsignal switching androuting
Optical network protection and restoration
Optical path monitoring (Workingwith OTDR or OCM)
Instrumentation resource sharing

现在查询

类别

热门产品

产品详细信息

1xN MEMS Optical Switch

1xN MEMS optical switchis based on micro-electro-mechanical system technology. It allows channel selection between one input fiber and N output fibers by rotating the mirror of MEMS chip.

The switch is bi-directional and can also be used as a Nx1 selector switch. The optical switch offers highly reliable, durable, long-life operation in a compact package.

Product Configurations

MEMS Optical Switch

Note:“C”:common port

“1、2、3...64”:possible selected output ports=1~64;

Optical Specifications

PARAMETER		VALUE	UNIT	NOTE
Wavelength		13:1290~1330 15:1525~1568 16:1600-1650	nm	Or customer specify
Test Wavelength		1310/1550/1625 or 1650	nm
OSW Channels		4/8/12/16/24/32/48/64		N
Insertion Loss	1x4	≤0.8 @S	dB	@CWL,23°C Without Connectors @S: 13 or 15 or 16 @D: 13&15 or 15&16 (If with connectors or support @D, IL increased by 0.2~0.3dB)
	1x8	≤0.8 @S
	1x12	≤1.0 @S
	1x16	≤1.0 @S
	1x24	≤1.2 @S
	1x32	≤1.2 @S
	1x48	≤1.4 @S
	1x64	≤1.4 @S
Return Loss		≥45	dB	Or customer specify
Repeatability		≤0.1	dB
Crosstalk		≥40	dB	Or customer specify
Polarization Dependence Loss		≤0.2	dB
Wavelength Dependence Loss		≤0.3 @S ≤1.0 @D	dB	@CWL±20nm, 23°C
Temperature Dependence Loss		≤0.4 @N≤16 ≤0.6 @N≥24	dB
Switch Time		5 @1x16 10 @1x32	ms	Module Or customer specify If support hitless, switching time doubled
Durability		≥1x10⁹	cycle
Maximum Optical Power		≤500	mW
Hitless		Optional @N≤32

Electrical and Mechanical Specifications

PARAMETER	VALUE	UNIT	NOTE
Operation Temperature	-5~65	°C
Storage Temperature	-40~85	°C
Operation Humidity	5~95	%RH
Storage Humidity	5~95	%RH

Pigtail and connector type/length

PARAMETER	VALUE	UNIT	NOTE
Fiber Type	G657A2 or G657B3 250um bare fiber
Fiber Pigtail (All Ports)	250um fiber or 900um loose tube
Fiber Length (All Ports)	1.00±0.05	m	Or customer specify
Optical Connector (All port)	None		Or customer specify

MECHANICAL DRAWINGS

MEMS Optical Switch

Figure 1 Mechanical Drawings(1xN≤16)

MEMS Optical Switch

Figure 2 Mechanical Drawings(1xN≥24)

MEMS Optical Switch

Figure 3 Cylindric Device with PCB（Type A, 1xN≥24）

MEMS Optical Switch

Figure 4 Module（Type B, 1xN≤16)

MEMS Optical Switch

Figure 5 Module（Type B, 1xN≤32）

相关产品

MXN MEMS 光开关

Features Proven MEMS durability and reliability Compact Form Factor TTL UART interface Qualified to Telcordia GR-1073-CORE and RoHS Applications Optical path selection AsAutomatic optical distribution rack

MEMS VOA 可调衰减器

Product Features Low insertion loss Low polarization dependent Compact size Available in both normally open and normally closed states Excellent reliability Product Application Power Management Receiver protective Channel Balance Instrumentation

2光8电千兆管理型POE交换机 FWAI2008GX

8*10/100/1000Mbps RJ45端口+2*千兆SFP端口 FWAI2008GX是一款全千兆网管型PoE交换机，能满足WIFI AP、IP-camera、WIFI网桥、IP电话等多种类型的设备PoE供电需求。产品采用新一代高性能硬件和软件平台，提供灵活、高性价比的全千兆接入和上行端口，支持三层路由协议、完备的安全防护机制、完善的ACL/QoS策略和丰富的VLAN功能，易于管理维护，满足用户对于网络设备易管理、高安全、低成本的组网需求，适用于校园、酒店及企业园区网络接入、汇聚、核心多种应用场景。

POB48 系列并行光收发模块

POB48系列并行光收发模块，主要应用于各种防务通信指挥系统和分系统，其功能是在多路电信号和光信号之间进行转换。模块采用微插座封装结构，密封。模块电连接器为弹片压接式，光接口为48芯MT\MPO连接器。工作温度(Case温度)范围为-40℃~85℃。模块支持单通道传输速率1.25Gbps~10.3125Gbps。

1.25G 1550nm 200KM DDM SFP 光模块

1.25G SFP optical transceiver module, support 1.25Gb/s 200 km transmission, It works in high-speed IDC connection solutions, network switch, PTN, OTN and so on. Features: Up to 1.25Gb/s Data Links Hot-Pluggable Duplex LC connector Up to200km on9/125μmSMF 1550nmCOOLED DFBlaser transmitter APD Receiver Single +3.3V Power Supply Monitoring Interface Compliant with SFF-8472 Maximum Power<1.5W Operating temperature range: Commercial: 0°C to 70°C, Industrial: -40°C to +85°C RoHS compliant and Lead Free Applications: Metro/Access Networks 1.25 Gb/s 1000Base-EZX Ethernet 1×Fibre Channel Other Optical Links

800G OSFP SR8 MM MPO12 Optical Transceiver IB

Features OSFP Serial Optical Interface 8x100G PAM4 retimed 800GAUI-8 electrical interface Dual MPO-12 APC connector and MPO16 APC connector are provided 8 channel VCSEL arrays and 8 channels PIN photo detector arrays Maximum link length of 60m on OM3 or 100m on OM4 OSFP MSA Compliant Hot Pluggable OSFP form factor Compliant to OSFP Module Specification Rev 5.0 Compliant with CMIS 5.2 Support Protocol Compliant with IEEE 802.3db Compliant to IEEE 802.3ck Low Power Consumption Less than 14W in temperature range of 0 to 70℃ Applications 800GBASE-SR8 800G Ethernet Data center

光纤第二路由自动切换保护设备RD-OLP 支持1路主备光纤切换

支持应用于各种光通信系统；支持双纤、单纤传输网络线路保护；支持自动或手动切换多种工作模式；支持主备路由实时监测；支持掉电、上电保持功能； OLP功能板与网元管理板相互独立，互不影响；支持SNMP、Web等多种图形化界面网管； 1U插卡式设计，容量灵活配置支持交流220V、直流-48V供电可选，1+1电源输入保护；

千兆1光1电收发器

功能特性 1个10/100/1000 Mbps 自适应RJ45端口 1个上联口为1000Mbps SFP或1*9光纤接口支持端口自动翻转（Auto MDI/MDIX）流控方式：全双工采用IEEE 802.3x标准，半双工采用Back pressure标准符合IEEE 802.3 10Base-T和IEEE 802.3u 100/1000Base-TX标准采用存储转发的交换机制 64～9000帧长范围内均可达到线速

联系我们